The full guarantee service for 12 months / 800 working hours starts at the moment of goods delivery or the first data transfer onto Automowing User portal , according to what happens first. The customer is obliged to inspect the goods immediately after the handover and is further to read the manual and potential guarantee conditions before the first use of the product. The customer is obliged to abide by the information strictly, otherwise the customer puts himself/herself in danger of damage caused by improper use. In case of potential software issues of faulty that may be attributed to autonomous operation, the IT service center determines the next steps. The debugging process always happens during the first step “remotely” at the customer’s and/or authorized IT service center. More in the General Terms and Conditions

You can log into your user account and manage all your machines in one place on Automowing User portal.

We have sent you the login information to the portal; you can also find it in the documents you received during the product handover. During the first activation, your autonomous lawnmower is registered and placed into your user account.

Fleet manager

• Supervises all the operators
• Assigns jobs to individual operators
• Uploads routes to individual mowers
• Checks the service inspections

The user account also manages all the necessary service tasks, inspections, oil changes, operating hours of each machine, current operation, and so on.

You control all your devices from one place.

The catalogue of spare parts

Yes, simply press the ‘Stop’ button on the lawn mower; or you can push a separate safety 'SOS Stop' button located on the remote controller, which immediately stops all machines within a certain area.

In case of emergency of mayor problems with the mowers please call:

For English Call +420 226 886 411

For German Call +49 346 024447 41

To be able to mow a new area in the Autonomous mode, you need to measure the property precisely first. Our specialists will do this for you. You can order this service on your user profile on the Automowing portal. We will plan an optimal route for the measured area, and you will then save the planned route from the user portal into machine’s memory. All you need is the Internet.

You need to verify whether the battery is charged and recharge it if required. The second reason the mower is not working might be a burnt 40A fuse, which needs changing. Please watch our video manual How to change the fuses. The last possibility is a faulty master switch. In this case, the master switch has to be changed. Please contact the service support.

There might be a problem with the battery that might need changing. Maybe you have to recharge the remote control. Please watch our video manual How to recharge all the units. It could also be a malfunction of the master switch on the remote control -- in this case, the master switch has to be changed. Please contact the service support.

Check the LED diodes on the black cupola of the mower, which is located by the master switch.

• If the LED diodes on the cupola emit blue light, it means the mower is paired with another remote control.
• The orange light indicates the Bluetooth module is being reset at the moment, and you need to reset the whole mower. If the reset does not help, it is necessary to replace the Bluetooth module in. Please contact our service.
• If the light is green, the remote control is ready to be paired, and you need to pair it with a specific mower again.

If the "SOS button" is not working, the "SOS button" and the mower have probably been disconnected. You need to contact a service center, and they will renew the pairing or, if needed, decide to change the entire SX module.

You have to check the connection of the connector to the electronic control unit, then check the connector on the bonnet by the LED strip.

It is possible that the LED strip has been damaged mechanically; if that is the case, you need to contact a service center and request a replacement.

The last possibility is a burned fuse which needs replacing. You can watch the videomanual How to replace fuses.

If the LED strip on the lawnmower flashes orange-red, it means the bumper sensor is switched on (by default after a collision with an obstacle).

If the LED strip flashes orange-red even though there was no impact before, it is necessary to adjust the bumper sensor at the service center or replace it.

Contact a service center, please. You can also watch the videomanual How to replace silent blocks and adjust bumpers.

The LTE antenna is probably not connected to the electronic control unit. You have to connect it.

If it is impossible to switch the mower to the online mode, or if it switched to the offline mode on its own accord, it means the LTE connection is too weak. In this case, the operator has to move the mower manually to a place with a better LTE signal.

If the steps above do not help, the reason might be a faulty LTE antenna, and it has to be changed in a service center.

The last possibility is the SIM card has not been activated, or its data are off or used up, and you need to contact a service center. Please contact our service centre.

The power will stop, the LED diodes on the remote control will turn off, indicating the FIX loss (the loss of the exact GNSS location). If the mower does not reconnect to its location within 30 seconds, it will be disconnected from the autonomous mode. The operator has to approach the machine and wait for the FIX to reconnect; after that, they can switch the mower to the autonomous mode again.

If the FIX does not start working on its own accord, the operator has to move the machine manually to a place with a better GNSS signal (with no obstacles such as trees, solar panels, roofs, etc.) to provide a better signal reception. The mower should reconnect to its position; if not, the operator has to restart the mower.

In case the restart does not help, it is necessary to check the GNSS RTK correction station (e.g., it might be flat, or the placement might need checking). If everything is all right, the operator has checked the quality of the GNSS signal even on the web portal MySpider, and it is strong enough, they have to contact a service center and request a GNSS antenna replacement.

The mower ID is required for any communication with support or service. You can find the Mower ID in multiple places.

• Directly on the machine, just bellow the cover behind the metal grid.
• In your account of mySpider portal, in the section devices - it is written just bellow the map.
• On the remote control that is paired with the mower.

The guarantee service covers material and process defects caused by common usage during the guarantee period.

During the guarantee period, our or one of our authorized partners’ service centres will repair or replace the machine or its parts that prove faulty due to the material production defect. In case of software issues or faults which may be assigned to the autonomous operation, the service IT center will design the next steps.

You can find more information about the guarantee conditions is in the General Terms and Conditions.

With a new purchase of a machine, an administrator account is created for you on Automowing online portal. At the same time, you receive access information to your account. You can find the access information in your mailbox as well as in the documents you received during the machine delivery and training.

You may log into the portal on Automowing.

In case you have forgotten your password, please use the possibility forgot the password right on the login portal.

If you encounter another login problem or administration of your account, do not hesitate to contact us through our Support and Service Request Form or over the telephone via the hotline.

Currently, our head service center for all requirements connected with hardware and software is located in the Czech Republic.

Furthermore, we have service representation at our authorized partners in Austria, Germany, Spain and UK.

Many requirements, especially in the software area, can be solved remotely thanks to our online and telephone support. Spare parts are delivered from our central stock or from one of our service partners.

You will find all the contact information for our service centers here.

Please contact our sales representatives.

They will arrange the nearest date when our specialists visit you and measure the dimensions of the new area, and they will discuss the conditions of this service with you.

You can also order the measurement service via Automowing User portal.

Until then, you can use the Perimeter mode function. You may find detailed information about the Perimeter mode use in the Spider Autonomous 2.0 manual or the video guide of perimeter mowing.

To start the Autonomous mode, you need to follow the following instructions:

• The mower is online (online light).
• The mower knows the GPS position (GPS light).
• The mower receives GPS_RTK data from the correction transmitter.
• The correction transmitter is at a distance maximum of 10 km.
• All the mower’s bumpers are intact and not activated.
• The mower has operated, at least, for 5 meters in the manual mode or has completed the calibration process.
• The mower is in the inclination that is not bigger than 35 degrees.
• The engine is on.

You need to verify whether the mower is in the online mode. If it is offline, it does not receive GMS data. Verify the status of your mower on the controller; the online LED light must be on. The second place where you can check the status of your mower is on the Automowing User portal". Here the indicator must also signal that the mower is in the online mode. If the mower is not online, it is necessary to move the machine and put it in a place with a stronger GSM signal. When the mower switches to the online mode, it is necessary to re-upload the route from the portal so that the mower can start mowing autonomously.

You can load a route to the autonomous mower via the Automowing User portal".

When using the Perimeter mode, a map is automatically loaded into the portal after the operator has driven the mower around the perimeter of the area manually using a remote control. We can recommend the video How to use perimeter mode, where you can learn all details to handle it.

The Spider Autonomous 2.0 mower has a unique service position, in which it is on a vertical tilt on one side. This position allows for easy and safe access into the mowing deck of the machine. Further cleaning and maintenance are described in the video guide How to clean the machine.

If you need any service, do not hesitate to visit our page support where you will find all information about the guarantee and post-guarantee service and the list and contacts to our service centres. You can also contact us on our customer line at +420 226 886 411, and we will tailor the maintenance or repair according to your needs.